Gaggia Classic Evo Pro Stainless Steel Espresso Machine NEW

How can I make a traditional Italian espresso?

1. Choose the blend you like the most. We suggest to select fresh coffee beans to grind at the moment to have aeven richer and more intense espresso

2. Grind the coffee. Be careful to grind at the right size: not too coarse (or water will flow too fast) and nottoo fine (or water will not flow)

3. Insert the correct filter in the filter-holder. Remove the frothing jet device if you want to use thetraditional filters.

4. Place the clean filter-holder in the group, put the cups on the cup warmer plate and switch the machine on

5. The temperature light is steady: the machine is ready to use

6. Dispense a bit of water, remove the filter-holder and fill it with ground coffee using the doser (one servingfor one cup)

7. Slightly beat the filter-holder

8. Tamp for a few seconds by applying a constant and even pressure

9. Remove any coffee residues from the edges of the filter-holder

10. Lock the filter-holder in the group and press the coffee button to start the brewing process

11. When you get the desidered in-cup quantity, press the coffee button once again to stop the brewing process.Now your espresso is ready!

To deep dive in the art of espresso making, watch the Gaggia Home Barista Academy video and learn all thebarista’s secrets!

How can I get an even warmer espresso?

To get an even warmer espresso, we suggest to follow these three little tips.

1. Turn on the machine a few minutes before using it, so it can heat properly and get ready to use.

2. Keep the clean filter-holder locked to the group – not too tight – both during the heating phaseand after cleaning. This preserves the temperature and avoids termal shocks.

3. Pre-heat the cups by placing them on the cup warmer or dispense a bit of hot water with the pannarello on thecups, then wipe them with a cloth

Which milk can I use to get a velvety milk froth?

We suggest to use whole cold milk (at circa 5° C / 41° F), with a protein content of at least 3% and afat content of at least 3.5%. Proteins will incorporate air in the cream, while fats will make it dense andsteady. Also semi-skimmed cow milk, some lactose-free milk and soy drink are proven to deliver a good result.

How can I froth milk for cappuccinos and other drinks?

1. Press the steam button

2. After 15-20 seconds, the steam temperature indicator light turns on

3. Turn the steam/hot water knob slightly counter-clockwise to eliminate any condensation from the wand, thenclose the knob again

4. Place the jug, half-filled with cold milk, under the steam wand

5. Place the steam nozzle just below the surface of the milk – avoid touching the bottom of the jug –and keep it close to the edge of the jug with an appropriate angle to produce a vortex

6. Turn the steam dispensing knob counter-clockwise to let the steam come out. To froth the milk correctly, thesteam nozzle must always be in contact with the milk and not with the froth

7. Once the desired frothing has been achieved, the steam nozzle must be pushed further to heat the milk well

8. Close the steam knob by turning it clockwise to stop dispensing steam, and remove the jug

9. Press the steam button

10. Let it rest for around 30 seconds to obtain a velvety texture.

To deep dive in the art of cappuccino making, watch the Gaggia Home Barista Academy video and learn all thebarista’s secrets!

Can I use mineral water?

Yes, you can use mineral still water or tap water. It is important not to use sparkling water as it cannegatively affect the brewing process.

How to prime/flush the machine?

Before you use your Gaggia Classic for the first time or in case the internal circuit has run out of water, youneed to flush/prime the machine with fresh water. Here below the easy instructions to follow:

1. Rinse the water tank and fill it with fresh water.

2. Place a container under the steam wand

3. Open the steam/hot water knob slowly by turning it counter-clockwise.

4. Press the brew button and the steam button

5. Dispense the whole water tank content through the steam wand.

6. To stop dispensing, press the brew button and the steam button again.

7. Close the knob by turning it clockwise.

8. Fill the water tank with fresh drinking water.

9. Insert the filter-holder into the brew unit from the bottom and turn it from left to right until it locks intoplace

10. Place a suitable container under the filter holder.

11. Press the brew button and dispense all the water in the tank.

12. Once the water tank is empty, stop dispensing by pressing the brew button again and emptyout the container.

13. Remove the filter holder from the unit by turning it from right to left and rinse it with fresh drinkingwater.The machine is now ready for use.

When do I have to descale my machine?

Scale is a normal consequence of using the machine, and it depends also on the quality of the water you use. Wesuggest to descale the machine every 2 months and/or whenever you notice a reduction in the water flow. Wesuggest to follow the step-by-step procedure illustrated in the instruction booklet and to only use the Gaggiadescaler that is especially thought especially for our espresso machines.

Which descaler can I use?

To descale your Gaggia coffee machine use only the Gaggia decalcifier, a unique solution made to ensure excellentperformances of the machine throughout time. Vinegar or other descaling agents must be avoided. Never usedescaling agents based on mineral acids such as sulfuric acid, hydrochloric acid and sulfamic acid. Thesedescaling agents may damage your coffee machine’s pipe and tube system.

How to properly clean the filter-holder?

In order to properly clean the filter-holder you need to:

1. Remove the filter that is installed

2. Wash the filter under tap water (not in the dishwasher)

3. Wash the inside of the traditional filter-holder under tap water (not in the dishwasher).

When and how to clean the filters?

Filters must be kept clean to guarantee an every day perfect result. If you notice a malfunction when brewingcoffee, immerse the filters in boiling water for 10 minutes and then rinse them with running water. For a morethorough cleaning, use the Gaggia oil remover tablets.

Which components are removable and washable?

It is possible to remove the water tank, the pannarello, the drip tray and drip tray plate. We suggest to washthem under tap water and to delicately wipe them with a clean cloth. We advise against washing these componentsin the dishwasher.